je viens de tomber la dessus dans mes archives
alors là
mais faut que je teste ça ce WE
Subject: SixTrak MIDI CC addressing
>Somebody once told me that all the parameter in the MAX are addressable
>via MIDI controller messages. Is this true?
>- M.
Yes.. It took me a while to get it right but it does work. The SixTrak,
MAX and Multi-Trak will respond to continuous controllers for all
parameters. This will work in both poly or mono (multi) modes. In the case
of multimode the unit will respond to continuous controllers discreetly for
each channel. Make sure you have turned LOCAL CONTROL OFF after setting the
mode and base channel. The controller number=parameter number + 2. The
parameter numbers are listed on top of the SixTrak but aren't printed on
the top of the MAX, the range is 00 to 35 with cutoff being #19, resonance
#20, ring-mod amt #29 and voice volume #35. The MAX and Multi-Trak will
both respond to velocity as well but the default on the MAX has this
disabled (I don't remember the enable command off the top of my head).
If you have a sequencer that can chase controllers at the beginning of the
sequence, you can use this feature to actually program basic sound
parameters on the MAX if you have no other way to program the patches.
-Christopher
" L'artiste se considère comme le créateur d'un monde spirituel qui lui est propre ."