Une architecture qui rappelle quand même pas mal le Vocoder 5000...
http://www.youtube.com/watch?v=2iXPL4wA60c[/video]
http://www.youtube.com/watch?v=4L9X9YK9JTs[/video]
http://www.youtube.com/watch?v=DHtnBwMODXg[/video]
22 band full analog design vocoder
LP48dB@185Hz&HP48dB@7040Hz
20 BP Filters 48 dB BP @ 220, 262, 311, 370, 440, 523, 622, 740, 880, 1047, 1245, 1480, 1760, 2093, 2489, 2960, 3520, 4186, 4978, 5920 Hz
Analysis section full analog with 20 BP, 1 LP, and 1 HP analysis filters
Speech In/Analysis with Compressor & Noise gate freely adjustable
Mic/Line combo XLR/TRS/TS input – no phantom power
Mic/Line Level Input Gain with dedicated analog Vu-meter
Synthesis section full analog with 20 BP, 1 LP & 1 HP analysis filters
Internal Carrier Oscillator with selectable Saw/Pulse Wave and dedicated VCO Level
Wide range VCO TUNE pot, with CV and MIDI external control capabilities! Freely adjustable
MIDI & CV Bend Amount over Internal Carrier VCO
FM on Saw/PW on Pulse wave freely adjustable
Internal Carrier Noise Generator with dedicated Noise Level
Voiced/Unvoiced Detector, for automatic switching between internal VCO and Noise
Voiced and Unvoiced activities LED
V/UV Mode OFF, Mixed V/UV, SWITCHED
Threshold V/UV freely adjustable
Time response for V/UV switching selectable Slow/Medium/Fast
Time response selectable for Symmetry Attack/Release, only Attack, only Release! Slew Rate fully adjustable from very fast to full freeze
Dedicated Freeze Slew switch, with external Gate and MIDI control
External Voiced and External Unvoiced signals with dedicated analog connections and level controls
Analysis/Synthesis controls
Each analysis band has dedicated envelope follower output, VCA control input & VCA output level for band mixing
Analysis/Synthesis interaction
Internal normalization 1-by-1 between analysis and synthesis bands
Front panel patching 1/4” for free re-configuration analysis/synthesis
Coupling control for different internal re-configuration with selectable offset
Env Foll -> VCA in 1-by-1 or +1/+2/+3/-1/-2/-3 offset from Env Foll to VCA CV In
Dedicated high-pass filter on the main output
Main output level control with dedicated Vu-Meter
MIDI interface
MIDI In/Thru on cabinet back panel
Dedicated hardware MIDI SubModule for 5U modular mounting
MIDI Note On/Off with MIDI Pitch Bend on Carrier Internal VCO Pitch or MIDI Mod Wheel for Slew Limiter Time control
MIDI Sustain On/Off for Slew Limiter Freeze On/Off
Front panel connections
Audio Input Connections: Combo XLR/TRS Mic/Line Inputs, external Voiced signal, external
Unvoiced signal
Control Input Connections: VCO 1V/Oct, Freeze Momentary Switch, Slew Time 0/+5V control ino Audio Output Connections: Internal VCO Output, Internal Preamp Output, Phones Output, Left
Output (odd numbered bands output), Right/Mono Output (even numbered bands output)o Control Output Connections: V/UV Control Output
Physical
Same hardware standard of Grp A2 Synthesizer & R-24 Step Sequencer
Fully independent HW cabinet with wooden panels
Optional “tolexed box” cabinet with upper handle and metal angles for real vintage loop.
Tolexed box has internal power for easiness of transport External power unit
8-unit width in 5U modular format
Can be installed in 5U modular cabinets with DotCom and Moon Modular powering standards
L'équipe d'Anafrog, soit on l'aime, soit on ne l'aime pas. Dans les deux cas elle s'en fout.
"It's not wise to upset a Wookiee."