Finegear "The Dust Collector"
2x CV LFOs
The 2 LFO modules have been included to serve as a starting point for modulating any of the effects or even the LFOs themselves. Each module contains:
Sine, Triangle and Square waveforms,
LFO speed CV input,
Speed and CV depth controls,
2 outputs,
1 inverted output
2x Tape Saturations
The two tape saturation emulators were included to help spice or dirty up sounds before or after passing through the other effects.
Saturation Type switch
Volume knob
Bypass switch,
Moddable diode configuration (for different sounds and behaviours)
Spring reverb
Besides having the classic spring tank sound, the spring reverb was integrated into the Dust Collector design to allow extensive interaction:
A VCA for the input and one for the output with CV input jacks and depth controls for…well, modular sonic experiments
a removable plexi cover over the spring tank for direct physical interaction with the springs
Delay
The included delay takes pride in its dirty and raunchy sound, as well as in its modulation potential. It has a temper and you can modulate it!
CV controlled time parameter
Feedback knob
Madness momentary switch for those momentary lapses of reason with infinite feedback.
Phaser
The Dust Collector Phaser is based on a classic model from the 1970s and it can go from subtle to swooshy. It also comes loaded with extensive modulation potential:
using either or both of the LFOs,
a knob and/or
a CV input
and even ambient light…
https://www.youtube.com/watch?v=WWZKZ05VcvQ[/video]
https://www.youtube.com/watch?v=RBrPDzBkXF0[/video]