The modules:
- Mult, Midi/USB interface
- "Storm 1, 2, 3 - Oscillators with bipolar modulation". The bottom two knobs on each are pulse width.
- Octave divider and vca
- Mixer
- "Magnetic fluctuations" - I see the words double and hi pass, some kind of dual filter?
- "Magnetic anomaly - transistor based band-pass filter" - There's a LP output and a something-else pass right out above
- "Discrete amplifier" followed by "Germanium 241"
- Trigger and "Gravity", looks like slew
- "Particle Impact" - dual looping adsr
- "Low frequency zone" - variable waveshape LFOs with sync
- "Magnetic Aurora - white and digital noise" can be clocked externally and has mod input
- "Ring traversal - ring modulator with symmetric modulation"
- "Dual polariser" I think
- "Space/Time - digital delay line" the switch says freeze
- "External signal treatment" - knobs say filtering and compensation, the switch next to the input says sensor/cv
- "Meteor shower" - knobs say "signal", "sweep" and "re-injection" hard to say what this is?
- Another mixer and mult
- "Main Volume", stereo out with cv controllable pan.
tout à fait d'accord, beaucoup de machines modernes n'ont plus que les ports IN et OUT et zappent le THRU. C'est super chiant, car nécessite un merger pour multiplier les ports midi... Et l'USB c'est naze car un branchement/débranchement et il faut en général rebooter (sans parler de la fiabilité amoindrie avec des conflits de toutes sortes)parceque dès la deuxième machine à la conception concon sans thru, on l'a dans l'os et on doit retrouver un nouveau port midi. Ou utiliser l'usb mais là encore c'est relou, gestion de ports midi etc...
Parce que la modularité/semi-modularité n'a rien à voir avec le précablage mais avec la modularité du systeme (ça parait idiot mais c'est bien ça)ikkini a écrit :Pourquoi "semi-modulaire" dans le titre ? Il est pré-patché en interne ?
C'est valable en architecture, en informatique etc...système modulaire /Prononciation ?/ masculin
1.Système constitué de modules s’emboîtant les uns dans les autres