bon j'ai testé ça , ce matin , la vitesse du LFO est bien modulable par une sortie CV , un clock issu d'un Keystep par exemple bat bien la mesure au tempo dans le cas ou le bouton LFO est à zéro ( je pense qu'on peut aller dans sa programmation interne par soft pour lui faire faire du 1/2,1/3,1/4 ) , en bougeant celui ci on perd vite la synchro et ça devient aléatoire , donc pas de solution pour moi , du moins avec ce que j'ai sous la main.
En regardant la doc du Mother il y a peut être une solution en se servant de la sortie ASSIGN :
The following output sources are available:
1: ACCENT (Default) This outputs a 0 to +5V filtered pulse signal from Accented pattern steps only.
2: CLOCK This outputs a 0 to +5V Clock signal at the internal clock tempo, one pulse per step.
3: CLOCK/2 This outputs a 0 to +5V Clock signal at half the clock rate of the internal clock tempo.
4: CLOCK/4 This outputs a 0 to +5V Clock signal at one quarter of the clock rate of the internal clock tempo.
ça doit marcher ...je vais tester
" L'artiste se considère comme le créateur d'un monde spirituel qui lui est propre ."