Page 1 sur 1

ST4

Publié : 23 janv. 2016, 21:03
par Calum
https://www.kickstarter.com/projects/84 ... er-tracker

Pas trouvé dans le moteur de recherche :roll: :satisfait:

Re: ST4

Publié : 23 janv. 2016, 21:31
par choque
Pas mal , ce projet : l'interface est bien boutonneuse comme il faut : ça me fait beaucoup penser au NerdSynth avec ce coté tracker à l' ancienne : http://nerdsynth.com/ .

La sortie vidéo sur le Nerdsynth c'est vraiment génial : les prises HDMI devraient devenir un truc courant sur les synthés / séquenceurs du futur : c'est çà l'avenir ! :fou: J' aime bien aussi l' idée des différentes cartouches à rajouter : AtMegatron , Meeblip Anode, SID, YM/AY, OPL3, CV/gate interface, cartouche vierge pour le D.I.Y ....

Re: ST4

Publié : 23 janv. 2016, 21:51
par sink
La vidéo est d'enfer !
On dirait le synthé de Jean-Michel de la Cogip !
Il est balèze, et sonne super !

Re: ST4

Publié : 18 sept. 2016, 14:13
par choque
Plus d'infos sur le ST-4 ici : http://www.tastychips.nl/wordpress/?page_id=933
http://www.tastychips.nl/wordpress/?p=1229

Features:
- 4 Stereo voices
- Analog multi-mode VCF per channel including voltage controlled resonance.
- 4 Stereo VCA’s
- 2 LFO’s with saw, square, sine, noise and sample modes
- Direct LFO modulation matrix: 4 channels x VCO, VCA, VCF
- ADSR envelope for VCO, VCA, VCF per channel
- MIDI IN: Monophonic on ch1..4 and polyphonic on ch5
- MIDI OUT ch1..4 (via tracker)
- Sampler and built-in microphone:
8 sample banks
configurable loop start, end
tuning
wav import/export
sample mapping
- Digital oscillators: saw, square, sine, noise, sample
- 128 instruments (MIDI patches):
- VCO, VCA, VCF env’s settings all include looping


- instrument chaining
- Direct control of voice pair detuning
- Built-in bitcrusher
- 3.2″ high colour TFT display
- On-board multi-channel sequencer “16 bit tracker style”, in conjunction with USB keyboard:
4 channels
16 steps, panning & volume definable per step
1024 positions
powerful editor with many block functions
independent glide per channel
polyrhythm support, tap tempo, bpm display
- Versatile casing usable as desktop or 19″ rackmount.
- Interfaces:
4x 6.35mm channel outputs
2x 6.35mm master outputs (stereo)
1x 3.5mm line input (for sampler)
DIN-5 MIDI IN, OUT, THRU
USB A (for USB keyboard)
USB B Programming/debugging interface
SD card, for sample and song I/O
3.5mm stereo headphone
2.1mm DC power




Cette vidéo est pas mal dans le genre acid : ( il faut zapper à 2 minutes , au début il programme son pattern ) , ça me fait penser a du vieux DJ Hyperactive .
https://www.youtube.com/watch?v=FG3GjLqB7O4[/video]


çà a l' air puissant comme séquenceur /tracker

https://www.youtube.com/watch?v=eSLx4vmgreM[/video]

https://www.youtube.com/watch?v=BFgDkj4SkHY[/video]

https://www.youtube.com/watch?v=DKnih4exJcA[/video]