Si vous le voulez en plus GROS: https://www.muffwiggler.com/forum/downl ... p?id=35620
Pro 3 Hybrid
Dammit, the page that appeared briefly on the Gear4Music website has been pulled before I was able to gather all the information. But it’s now up on Zzounds and I can give you the full details.
The Pro 3 has two analogue oscillators with three classic waveshapes and one digital wavetable oscillator. The VCOs have variable shape that can be modulated. The digital oscillator has 32 wavetables each containing 16 waves with morphing between them. It can also act as an LFO for some complex wavetable-based modulation. It’s designed as a monosynth but you can play the oscillators independently giving 3-note polyphony with individually gated envelopes but paraphonic articulation through the filter.
The 3 filters are based on the Prophet-6, OB-6 and the Moog ladder filter respectively giving a 4-pole 24 dB/oct low-pass, a 2-pole 12dB/oct state variable filter with low, high, notch and band-pass, and a 4-pole 24dB/oct transistor ladder filter with option resonance compensation. The filter also has a whacking great bit cutoff knob.
A noise oscillator can be mixed in along with an external input. There’s hard sync, per-oscillator glide and oscillator slope. There are 3 syncable LFOs with phase offset and slew. And there are 4 envelopes which can all be looped and assigned to multiple destinations via a 32-slot matrix.
At the end of the chain there’s a digital effects section with reverb, delay and modulation effects. There is tuned feedback with “Grunge” for extra-aggressive tonal destruction and a programmable analog distortion.
For sequencing it comes with a 16-track 16-step sequencer and 4 phrases with both realtime and step-time input. It has ratcheting, variable gate and sequence lengths, multiple playback modes and paraphonic operation. It can also control any parameter in the modulation matrix.
Donc sur le papier - en attendant des démos - on peut voir ce Pro3 comme le fils du PolyEvolver!
