https://www.artisanelectronicinstruments.com
The next step in voice architecture;
Osc 1: Discrete Saw Core with Wave-folding & PWM
Sub Osc 1 with its own Low Pass VCF
Osc 2: Discrete Saw Core with PWM, Sync and FM
Osc 3: Digital wavetable, Karplus Strong + Noise Source
3 input Digital Ring Modulator
8 Pole Multi-Mode Dual Peak Filter
VCA with soft and hard clipping distortion
4 ADAHSR Envelopes with variable shape
3 LFO with key-sync and delay
Modulation Adders, multipliers, lag, contouring....
Full MIDI interface
User selectable CV In and Out
100 user patches and built-in standard patches
Custom Digital FX with modulate-able parameters
Over 60 Modulation sources
Over 35 Destinations (all simultaneous)
Gigantic wall of sound;
4 to 8 voices, with all the features listed above
5 Octave FATAR keyboard with Aftertouch
64 step 2 channel sequencer can act as a modulation source to over 100 parameters!
Additional knobs and switches for more direct live control.
Inboard power supply ( no wimpy wall wart).
Built in Digital Effects
-Oscillator Details
Osc 1: Saw, Sine, Triangle, PWM outputs
4 Stage Wavefolder
Mix the Wavefolder and PWM
Separate Glide rate
Modulate the Wave and PWM
Modulate the Folding
Modulate the Mix Level
Separate Glide rate
Sub Osc 1: One Octave down
Dedicated Low Pass filter
Modulate the Sub Osc from Square through Sine plus Pitch Tracking
Modulate the Mix Level
Osc 2: Saw and PWM
Sync and and FM
Separate Glide rate
Modulate the FM amount from Osc 3
Sync to Osc 1
Modulate the Wave and PWM
Modulate the Mix Level
Osc 3: Digital Wavetable + Noise Source
Multi-Mode 3 input XOR Ring Mod
Swarm Oscillator
Karplus Strong mode
Modulate the Mix Level
-Filter Details
8 Pole Cascade OTA Multi-Mode Filter
6 Modes
12 or 24db Low Pass
12 or 24db High Pass
12 or 24db Band Pass
Dual Resonance Peaks
Variable Band Pass Width
Modulate Shape, Resonance and Frequency
Modulate Band Width
Variable Key Tracking
-VCA Details
Linear VCA
Controlled overdrive Pre and Post filter
Two selectable modulation sources
Drone Mode
-LFO Details
3 independent LFOs
Sine, Triangle, Ramp Up and Down, Random and Random Slope Waves
Rate Modulation
60 second to 1Khz frequency
0 to 10 Second Delay
Cycle Re-Sync to the Trigger
-Envelope Generator Details
4 independent DAHDSR
Delay, Attack, Hold, Decay, Sustain and Release stages.
Time, Hold length or Sustain level modulation
Linear. Exponential or Punch shapes
Soft, Hard re-triggering
Looping mode
-Man-Machine-Interface
Bright OLED graphic display
Shows the details of whatever knob moved or button pressed
Quick access to Save and Load patches
Quick Access to the Modifiers
Setup MIDI. SYSEX, Poly Modes
-Modifiers
Combine and shape normal modulation sources to create new ones
Add, Average, Multiply, Invert, Gain/Attenuate
Min/Max, Quantify,Limit, Switch
Lag and Shape Contouring
Link knobs and route CC to parameters
