J'avoue que ces teasers donnent un peu l'eau à la bouche, seule la réputation de Behringer sur ses autres produits (patchs calamiteux, effets légèrement inspirés de....) laisse un je ne sais quoi d'interrogations dans les discussions que j'ai sur le sujet avec d'autres passionnés (peut être bien fondées, mais on espère toujours se tromper), mais en tout cas le ramage semble là, le plumage aussi.....Attendons la suite
12 voix, c'est confortable, il est peut être splitable avec affectation d'un arpegio sur la gauche
Prenez bien soin de vous et de vos proches...y'en a pour un bon moment encore...
et la BAAAM le prix vient d’être multiplié par 2 !
un peu chiant tous ces teasers on veut du concret maintenant. bon en même temps ça fait parler ils ont réussi leur coup !
Elektron OT, roland JU06, Volca Keys, MAM mb33, Casio CZ1000, Boss BX16
Faudrait que ce soit dispo avant la sortie définitive du Royaume-Uni de l'Europe pour éviter un surplus de taxes vu que c'est fabriqué en Angleterre...
Ce sera certainement le cas, car les anglais n'ont plus l'air pressés...
Dernière modification par BLT le 24 juil. 2016, 12:47, modifié 1 fois.
Raison :merci de ne pas citer le message juste précédent, ça allonge inutilement les topics, il y a un bouton "répondre" là en bas à gauche
"You can't make a good Prodigy song without breaking some eggs" - liam omlett
ascent a écrit :vu que c'est fabriqué en Angleterre...
Tu tiens ça d'où ? Je sais pas si c'est ironique, vu la réputation de Behringer.
Sinon 12 voies, on a même pas assez de doigts pour en jouer, j'espère que ça va pas trop faire gonfler le prix, mais si c'est vraiment fabriqué en Angleterre, ça va être dans une gamme plus proche de l'OB6 que du Minilogue
"...Pour un projet de cette envergure, nous allons prendre nos meilleurs ingénieurs et techniciens. Nous ferons cela en Angleterre, à Manchester, directement chez Midas."
il sera très certainement fabriqué en Chine dans leurs usines (où ils fabriquent notamment la Midas pro 2 qui vaut plus de 10 000€)
cette dernière vidéo est plutôt convaincante
Moi aussi ça me faisait penser au développement. Behringer champion du low-cost qui lance un poly analo 12 voies fabriqué en Angleterre d'un coup, ça risques de créer une certaine confusion.
ri0h a écrit :Moi aussi ça me faisait penser au développement
Oui, vous avez sans doute raison. Je me suis naïvement laissé influencer par le nouveau model D et le River que j'attends avec impatience.
Sinon, pour rebondir sur la remarque d'Alien666, je ne me souviens plus si c'est chez Midas, mais un ingé son m'avait parlé d'une console qui n'avait pas trop de succès et qui a soudain eu une super notoriété en changeant de nom et avec un prix augmenté par 2, mais c'était la même électronique...
On a du pot si c'est Midas qui le construit, même s'il n'y aura pas d'échappement dans la mécanique du clavier, avec Behri, on est sûr qu'il n'y aura pas vidange de nos comptes en banque
Prenez bien soin de vous et de vos proches...y'en a pour un bon moment encore...
Honnêtement, je pense que ce synthé peut tenir la route (à voir dans le temps aussi).
Je pense que le Sieur Uli doit quand même être au courant de ce qui se dit sur son matos et de ses produits dont le design est souvent disons "fortement inspiré"...Si sa machine tient donc la route, il risque de devenir un acteur sérieux dans le synthé analo et si le prix est "Behri like", ça ne peut que favoriser bonne presse....
Prenez bien soin de vous et de vos proches...y'en a pour un bon moment encore...
Je pense que cela en interessera certains,
Il y a un fil sur le synthé Berhinger sur Gearslutz, je vous épargne d'en chercher le peu de passages croustillants et vous colle ici deux citations intéressantes, deux posts de Uli Berhinger qui en dis un peu plus. On en pense ce que l'on veut, on peut trouver cela un peu romancé, mais personnellement je trouve particulièrement agréable d'avoir quelques mots, très enthousiaste et reconnaissant envers ses ingénieurs, de la part de l'entrepreneur derrière le projet, et finalement j'ai l'impression que cela reste assez rare (je ne sonde pas non plus les forums donc je me trompe peut être...). Et de comprendre mieux certains aspects qui nous paraissent autres quand on est de l'autre coté de l'écran (les teasers, fierté des ingénieurs en famille, je trouve cela chouette).
Bref, voici un peu de lecture, en anglais veuillez m'excuser de ne pas pouvoir traduire.
1_
Allow me to give you a little bit of background information about the new synth. When I was a young kid, I built an electric piano/synthesizer called the UB1 (picture below). The synth had two analog oscillators and a filter that was so unstable that at times it acted as an oscillator - and this was not by design.
The keyboard and the massive toggle switches on the right side came out of an EKO organ that didn't survive the impact of my screwdriver.
The UB1 was nothing great by today's standards but I believe it is this very keyboard that sparked off my passion for music and electronics and later got me into this wonderful industry.
Unfortunately the UB1 got lost during a factory move and for the past 40 years I always wanted to build a synthesizer again. When I shared my deep passion with the Midas engineering team in Manchester UK a few years ago, I was very surprised how many of these engineers had a tremendous passion for synths, too.
That's when the "madness" started and there is no other way to describe it as for the past few years these guys literally worked day and night to get it done.
The synthesizer was initially considered a pure "labor of love" project as we had no commercial aspirations. However what was considered a simple synth project, got completely out of hand and sound capabilities plus features got added on a weekly basis.
People constantly heard me say: "Pete, we got to stop this now", but you can imagine that it had little impact and the team kept on adding and adding. I can't even remember how many front panel design iterations we went through and I believe the guys are still adding more features as we speak - of course without telling me:-).
Because the team wanted to fulfill my dream and build me a synthesizer, I had no choice than to let them go crazy and I am afraid this is exactly what happened:-).
At the same time, the boys also wanted to have some fun with the marketing so please forgive them for the teasers. I am happy to take the blame!
I like to take the opportunity to thank Pete Sadler, Rob Belcham and the rest of the Midas team from the bottom of my heart for what they have done for me.
Hopefully some more people out there will love the synth as much as I do.
Uli
2_
I like to clarify that these are 12 voices with each 2 DCO's and 2 LFO’s. The oscillators are DCO’s, which means these are digitally controlled analog oscillators; so the synth has 24 full-blown analog oscillators.
Once we reveal the board assembly images, you will discover the thousands of discrete components that went into this design and the extreme density of the multi-layer boards. This synth is a true engineering masterpiece from our Midas engineers, a company that is famous for making the world’s best mixing consoles.
A little side story: We specifically launched the 4th video on a Sunday morning UK time as some of our engineers wanted their kids to participate in the rollout of this important video. Over the past years, many of these people have heavily sacrificed family time for this synthesizer. I am sure there are some proud kids and dads out there.
Thank you all for making this such a wonderful journey. I can honestly say that for me this is the most enjoyable product since I started the company nearly 30 years ago.
Et pour compléter cela, une image monté par quelqu'un, également provenant du forum Gearslutz (point de pub excessive... mais ça vous évitera de perdre du temps à y aller si jamais...)